دانشگاه علوم پزشکی شهید بهشتی
  • ثبت‌نام
  • ورود
  • فارسی
    • English

ارتقای ایمنی و پیشگیری از مصدومیت ها

  • صفحه اصلی
  • درباره
    • درباره‌ی مجله
    • نمایه نامه ها
    • ارسال مقاله
    • تیم سردبیری
    • بیانه حریم خصوصی
    • اطلاعات تماس
  • شماره
    • شماره جاری
    • بایگانی‌ها
  • اخلاق نشر
  • اظهارنامه
  • دوره آموزشی
    • فهرست بازبینی برای ارزیابی دست نوشته های علمی
  • یادگیری
  • خلاصه مقالات کنگره ها و سمینارها
    • سیزدهمین همایش دانشجویی تازه های علوم بهداشتی کشور
    • نهمین کنگره اپیدمیولوژی ایران
    • چهارمین همایش بین‌المللی و پنجمین همایش دوسالانه ارگونومی ایران
جستجوی پیشرفته
  1. صفحه اصلی
  2. بایگانی‌ها
  3. دوره 10 شماره 4 (1401)
  4. پژوهشی/ اصیل پژوهشی

دوره 10 شماره 4 (1401)

آوریل 2023

تعیین روابط علی بین مؤلفه‌های مؤثر بر توسعه ایمنی و بهداشت شغلی در شرکت های تولیدی با استفاده از تحلیل تم و دیمتل فازی

  • رامین شادی
  • ناصر فقهی فرهمند
  • کماالدین رحمانی

ارتقای ایمنی و پیشگیری از مصدومیت ها, دوره 10 شماره 4 (1401), 29 آوریل 2023 , صفحه 363 - 349
https://doi.org/10.22037/iipm.v10i4.38819 چاپ شده: 2023-05-13

  • مقاله
  • دانلود
  • ارجاع
  • مراجع
  • آمار
  • اشتراک

چکیده

سابقه و هدف: تضمین ایمنی در محیط کار یکی از وظایف اساسی سازمان­دهندگان فرآیند کار یعنی کارفرمایان است. کارفرمایان باید کلیه خطرات و مزاحمت‌های شغلی مرتبط با کار انجام‌ شده را که باعث بروز حوادث و بیماری‌های شغلی می‌شود محدود و از بین ببرند؛ بر همین اساس هدف این پژوهش تعیین روابط علی بین مؤلفه‌های مؤثر بر توسعه ایمنی و بهداشت شغلی بود.

روش کار: این تحقیق از منظر هدف، کاربردی- توسعه­ای بوده و از منظر روش انجام کار آمیخته مبتنی بر روش­های کیفی و کمی محسوب می­ گردد. جامعه آماری این پژوهش شامل کلیه شرکت ­های تولیدی شهر تبریز بوده که برای جمع ­آوری داده­ ها از دو پرسشنامه استفاده ­شده است. به منظور تجزیه ­و­تحلیل داده­ ها از روش تحلیل تم، تحلیل عاملی تأییدی و دیمتل فازی استفاده­ شد.

یافته‌ها: یافته­های پژوهش در بخش تحلیل تم نشان می­دهد که مؤلفه‌های مؤثر بر توسعه ایمنی و بهداشت شغلی در هفت تم اصلی و سی و هشت تم فرعی دسته­بندی می­گردد. همچنین مقادیر ریشه میانگین مجذور باقی‌مانده‌ها کمتر از 05/0، ریشه میانگین مربعات خطای برآورد کمتر از 09/0، شاخص نیکویی برازش و شاخص برازندگی تطبیقی بزرگتر از 9/0 و خی­دو بهنجارشده کوچک‌تر از 3 برای تمامی مدل­های تأییدی محاسبه شده بود که نشان دهنده مناسب بودن  دسته­بندی تم­های فرعی بر اساس تم­های اصلی و تأیید تم­های اصلی بوده است. نتایج دیمتل فازی نیز نشان می­دهد که سه مؤلفه اصلی سازمان و مدیریت، اقدامات مدیریتی و مکانیزم نظارت و اجرا در گروه علت و تأثیرگذار قرار می­گیرند. سایر مؤلفه‌های اصلی نیز در گروه معلول و تأثیرپذیر قرارگرفته‌اند.

نتیجه‌گیری: مدیران شرکت­ های تولیدی می ­توانند با تقویت­ مولفه­ های سازمان و مدیریت، اقدامات مدیریتی و مکانیزم نظارت و اجرا نسبت به بهبود و توسعه برنامه­ های ایمنی و بهداشت شغلی در شرکت اقدام کرده و باعث کاهش حوادث گردند.

به این مقاله، به صورت زیر استناد کنید:

Shadi R, Feg-hi Farahmand N, Rahmani K. The Causal Relationships between the Factors Affecting the Development of Occupational Safety and Health in Manufacturing Companies by Using Theme Analysis and Fuzzy DEMATEL. Irtiqa Imini Pishgiri Masdumiyat. 2022;10(4):349-63. Doi: 10.22037/iipm.v10i4.38819

کلمات کلیدی:
  • ایمنی و بهداشت شغلی؛ تحلیل تم؛ دیمتل فازی
  • pdf 6

ارجاع به مقاله

1.
شادی ر, فقهی فرهمند ن, رحمانی ک. تعیین روابط علی بین مؤلفه‌های مؤثر بر توسعه ایمنی و بهداشت شغلی در شرکت های تولیدی با استفاده از تحلیل تم و دیمتل فازی. Irtiqa Imini Pishgiri Masdumiyat [اینترنت]. 13 می 2023 [ارجاع شده 28 جولای 2026];10(4):363-49. قابل دسترس در: https://journals.sbmu.ac.ir/spip/article/view/38819
  • ##plugins.generic.citationStyleLanguage.style.acm-sig-proceedings##
  • ##plugins.generic.citationStyleLanguage.style.acs-nano##
  • ##plugins.generic.citationStyleLanguage.style.apa##
  • ##plugins.generic.citationStyleLanguage.style.associacao-brasileira-de-normas-tecnicas##
  • ##plugins.generic.citationStyleLanguage.style.chicago-author-date##
  • ##plugins.generic.citationStyleLanguage.style.harvard-cite-them-right##
  • ##plugins.generic.citationStyleLanguage.style.ieee##
  • ##plugins.generic.citationStyleLanguage.style.modern-language-association##
  • ##plugins.generic.citationStyleLanguage.style.turabian-fullnote-bibliography##
  • ##plugins.generic.citationStyleLanguage.style.vancouver##
  • ##plugins.generic.citationStyleLanguage.download.ris##
  • ##plugins.generic.citationStyleLanguage.download.bibtex##

مراجع

Zarei E, Dormohammadi A. Accidents analysis in a disaster and emergency medical management center. Safety promotion and injury prevention. 2015;3(3):191-8.

Małysa T. Application of Forecasting as an Element of Effective Management in the Field of Improving Occupational Health and Safety in the Steel Industry in Poland. Sustainability. 2022 25;14(3):1351. https://doi.org/10.3390/su14031351.

Feng Y, Zhang S, Wu P. Factors influencing workplace accident costs of building projects. Safety science. 2015; 72:97-104.

Ceylan H, Analysis of occupational accidents according to the sectors in Turkey. Gazi university journal of science. 2012;25(4):909-18.

Çalış Boyacı A, Selim A. Assessment of occupational health and safety risks in a Turkish public hospital using a two-stage hesitant fuzzy linguistic approach. Environmental Science and Pollution Research. 2022;29(24):36313-25.

Kavouras S, Vardopoulos I, Mitoula R, Zorpas AA, Kaldis P. Occupational Health and Safety Scope Significance in Achieving Sustainability. Sustainability. 2022;14(4):2424. https://doi.org/10.3390/su14042424.

Kim JY. Psychological distress and occupational injury: findings from the National Health Interview Survey 2000-2003. Journal of Preventive Medicine and Public Health. 2008;41(3):200-7.

Maalouf MM, Hasle P, Vang J, Hamja A. Complementarities between operations and occupational health and safety in garments. Sustainability. 2021;13(8):4313. https://doi.org/10.3390/su13084313.

Vardopoulos I, Konstantinou Z. Study of the possible links between CO2 emissions and employment status. Sustainable Development, Culture, Traditions Journal. 2017; 1:100-12.

Pouliakas K, Theodossiou I. The economics of health and safety at work: an interdisciplinary review of the theory and policy. Journal of Economic Surveys. 2013;27(1):167-208.

Bernstein PL, Bernstein PL. Against the gods: The remarkable story of risk. New York: John Wiley & Sons; 1996.

Pillay M. Taking stock of zero harm: A review of contemporary health and safety management in construction. InCIB W099 International Conference on Achieving Sustainable Construction Health and Safety 2-3 June 2014 Lund University, Lund, Sweden Ingvar Kamprad Design Centre (IKDC) 2014 (p. 70).

Geller ES. Behavior-based safety and occupational risk management. Behavior modification. 2005;29(3):539-61.

Hosseinian SS, Torghabeh ZJ. Major theories of construction accident causation models: A literature review. International Journal of Advances in Engineering & Technology. 2012 1;4(2):53-66.

Lundberg J, Rollenhagen C, Hollnagel E. What-You-Look-For-Is-What-You-Find–The consequences of underlying accident models in eight accident investigation manuals. Safety science. 2009;47(10):1297-311.

Katsakiori P, Sakellaropoulos G, Manatakis E. Towards an evaluation of accident investigation methods in terms of their alignment with accident causation models. Safety science. 2009;47(7):1007-15.

Attwood D, Khan F, Veitch B. Occupational accident models—Where have we been and where are we going?. Journal of Loss Prevention in the Process Industries. 2006;19(6):664-82.

Jafari MJ, Gharari M, Kalantari S, Omidi L, Ghaffari M, Asadolah Fardi G. The influence of safety training on improvement in safety climate in construction sites of a firm. Safety promotion and injury prevention. 2015 2(4):257-64.

Psacharopoulos G, Patrinos HA. Returns to investment in education: a decennial review of the global literature. Education Economics. 2018;26(5):445-58.

Tuhul HS, El-Hamouz A, Hasan AR, Jafar HA. Development of a conceptual framework for occupational safety and health in Palestinian manufacturing industries. International Journal of Environmental Research and Public Health. 2021;18(3):1338. https://doi.org/10.3390/ijerph18031338.

Thirunavukkarasu A, Alrawaili KA, Al-Hazmi AH, Dar UF, ALruwaili B, Mallick A, Wani FA, Alsirhani AI. Prevalence and Risk Factors of Occupational Health Hazards among Health Care Workers of Northern Saudi Arabia: A Multicenter Study. International Journal of Environmental Research and Public Health. 2021;18(21):11489. https://doi.org/10.3390/ijerph182111489.

Ilbahar E, Karaşan A, Cebi S, Kahraman C. A novel approach to risk assessment for occupational health and safety using Pythagorean fuzzy AHP & fuzzy inference system. Safety Science. 2018;103:124-36.

Liu H, Li J, Li H, Li H, Mao P, Yuan J. Risk Perception and Coping Behavior of Construction Workers on Occupational Health Risks—A Case Study of Nanjing, China. International journal of environmental research and public health. 2021;18(13):7040. https://doi.org/10.3390/ijerph18137040.

Shadi R, Feghi-Farahmand N, Rahmani K. A Causal Model of Factors Affecting the Development of Occupational Safety and Health Using Interpretive-Structural Modeling. Safety Promotion and Injury Prevention. 2021;9(3):201-11.

Braun V, Clarke V. Using thematic analysis in psychology. Qualitative research in psychology. 2006;3(2):77-101.

Clarke V, Braun V. Teaching thematic analysis: Overcoming challenges and developing strategies for effective learning. The psychologist. 2013;26(2): 120-123.

Maguire M, Delahunt B. Doing a thematic analysis: A practical, step-by-step guide for learning and teaching scholars. All Ireland Journal of Higher Education. 2017;9(3): 3351-33514.

Iranzadeh SO, Soltanifesaghandi GR. Measuring Cause and Effect Relations among the Organizational Factors Affecting the Performance of Industry Safety Based on Fuzzy DEMATEL Method. Iran occupational health. 2016;13(1):27-37.

Li RJ. Fuzzy method in group decision making. Computers & Mathematics with Applications. 1999;38(1):91-101.

Jassbi J, Mohamadnejad F, Nasrollahzadeh H. A Fuzzy DEMATEL framework for modeling cause and effect relationships of strategy map. Expert systems with Applications. 2011;38(5):5967-73.

Shieh JI, Wu HH, Huang KK. A DEMATEL method in identifying key success factors of hospital service quality. Knowledge-Based Systems. 2010;23(3):277-82.

da Silva SL, Amaral FG. Critical factors of success and barriers to the implementation of occupational health and safety management systems: A systematic review of literature. Safety science. 2019;117:123-32.

İnan UH, Gül S, Yılmaz H. A multiple attribute decision model to compare the firms’ occupational health and safety management perspectives. Safety Science. 2017;91:221-31.

Li Y, Ning Y, Chen WT. Critical success factors for safety management of high-rise building construction projects in China. Advances in Civil Engineering. 2018;2018: 1516354:1-1516354:15.

Al-Refaie A. Factors affect companies’ safety performance in Jordan using structural equation modeling. Safety science. 2013;57: 169-78.

Jin H-S, Lee D-E. Developing the Path Model defining the Relationship between Construction Worker's Personal Characteristics and Safety Behaviors. Journal of the Korea Institute of Building Construction. 2013;13(2):169-80.

Santos G, Mendes F, Barbosa J. Certification and integration of management systems: the experience of Portuguese small and medium enterprises. Journal of cleaner production. 2011 ;19(17-18):1965-74.

Saunders LW, Kleiner BM, McCoy AP, Ellis KP, Smith-Jackson T, Wernz C. Developing an inter-organizational safety climate instrument for the construction industry. Safety science. 2017; 98:17-24.

Mahmoudi S, Ghasemi F, Mohammadfam I, Soleimani E. Framework for continuous assessment and improvement of occupational health and safety issues in construction companies. Safety and health at work. 2014;5(3):125-30.

Hinze J, Hallowell M, Baud K. Construction-safety best practices and relationships to safety performance. Journal of construction engineering and management. 2013;139(10):04013006.

Cheng EW, Ryan N, Kelly S. Exploring the perceived influence of safety management practices on project performance in the construction industry. Safety science. 2012;50(2):363-9.

Fang DP, Huang XY, Hinze J. Benchmarking studies on construction safety management in China. Journal of construction engineering and management. 2004;130(3):424-32.

  • چکیده مشاهده شده: 343 بار
  • pdf 6 دانلود شده: 198 بار

آمار دانلود

  • لینکدین
  • تویتر
  • فیسبوک
  • گوگل پلاس
  • تلگرام

##plugins.block.developedBy.blockTitle##

سامانه مجله باز

زبان

  • فارسی
  • English

اطلاعات

  • برای خوانندگان
  • برای نویسندگان
  • برای کتابداران
  • صفحه اصلی
  • بایگانی
  • ارسال مقاله
  • درباره‌ی مجله
  • تیم سردبیری
  • اطلاعات تماس

این مجله تحت لیسانس CC BY-NC4.0 منتشر می شود.

Creative Commons License

ISSN-Online: 2383-1901| ISSN-Print: 2345-2455

تمامی حقوق این وب‌سایت متعلق به فصلنامه ارتقای ایمنی و پیشگیری از مصدومیت ها است.

https://goo.gl/maps/fj1criqWPtdWkB416

قدرت یافته از OJSPlus