Influence of Fiber Laser (1064 nm) on Shear Bond Strength of Titanium Abutment and Resin Cement Fiber Laser Effect on Titanium-Resin Cement Interface
Journal of Lasers in Medical Sciences,
Vol. 13 (2022),
10 January 2022
,
Page e77
Abstract
Introduction: The present study was performed to evaluate the influence of a 1064 nm fiber laser on shear bond strength (SBS) at the interface of titanium and resin cement.
Methods: Forty titanium discs of 6 mm × 3 mm (diameter and thickness respectively) were categorized into four groups (n=10): control group without any surface treatment and three groups treated with a fiber laser with 81 ns pulse duration, 30 kHz frequency, 10000 mm/s scanning speed, 0.05 mm spot size, and different average power values (3, 5 and 7 W) depending on the tested group. Titanium disc characterization was performed by the scanning electron microscope (SEM) and surface roughness tester. Phase analysis was achieved using an X-ray diffractometer (XRD). Following these tests, resin cement application to titanium discs was performed. SBS values were determined by the universal testing machine. After debonding, the surface of titanium discs
was examined by the stereomicroscope for the determination of failure modes. Data analysis was performed using analysis of variance (ANOVA) and Tukey HSD tests (α=0.05).
Results: A higher surface roughness value was observed in the 7 W group followed by the 5 W and 3 W groups, and the lowest surface roughness was in the control group. Additionally, the lowest SBS value was obtained from the control group and the highest SBS value was obtained from the 7 W group followed by the 5 W and 3 W groups.
Conclusion: SBS between titanium abutment and resin cement can be significantly enhanced by using a fiber laser as a surface treatment considering tested laser parameters; additionally, a positive association between surface roughness and SBS was noted in the experimental groups.
- Fiber laser; Titanium abutment; Shear bond strength; Resin cement; Surface roughness
How to Cite
References
Wang RR, Fenton A. Titanium for prosthodontic applications: a review of the literature. Quintessence Int. 1996;27(6):401-8.
Jaafar MK, Al-Tamemi EI. Immunohistochemical evaluation of vascular endothelial growth factor and transforming growth factor-beta on osseointegration of CpTi implant radiated by low level laser therapy. J Baghdad Coll Dent. 2014;26(2):79- 86. doi: 10.12816/0015200.
Al-Tamemi EI. Analysis of inflammatory cells in osseointegration of CpTi implant radiated by low level laser therapy. J Baghdad Coll Dent. 2015;27(1):105-10. doi: 10.12816/0015273.
Safi IN, Mohammed Ali Hussein B, Al-Shammari AM, Tawfiq TA. Implementation and characterization of coating pure titanium dental implant with sintered β-TCP by using Nd:YAG laser. Saudi Dent J. 2019;31(2):242-50. doi: 10.1016/j. sdentj.2018.12.004.
Al-Rawi NJ, Mohammed Ali Hussein B, Hadi NM. Biomechanical effect of Nd:YAG laser ablation on commercially pure titanium dental implant (in vivo study). Int J Sci Res. 2017;6(3):244-8.
Safi IN, Mohammed Ali Hussein B, Al-Shammari AM. In vitro periodontal ligament cell expansion by co-culture method and formation of multi-layered periodontal ligament-derived cell sheets. Regen Ther. 2019;11:225-39. doi: 10.1016/j. reth.2019.08.002.
Safi IN, Mohammed Ali Hussein B, Al-Shammari AM. Biohybrid dental implants prepared using stem cells with β-TCPcoated titanium and zirconia. J Periodontal Implant Sci. 2022;52(3):242-57. doi: 10.5051/jpis.2006080304.
de Oliveira Abi-Rached F, Fonseca RG, Haneda IG, de Almeida-Júnior AA, Adabo GL. The effect of different surface treatments on the shear bond strength of luting cements to titanium. J Prosthet Dent. 2012;108(6):370-6. doi: 10.1016/ s0022-3913(12)60194-2.
Akin H, Guney U. Effect of various surface treatments on the retention properties of titanium to implant restorative cement. Lasers Med Sci. 2012;27(6):1183-7. doi: 10.1007/s10103- 011-1026-7.
Chaar MS, Att W, Strub JR. Prosthetic outcome of cementretained implant-supported fixed dental restorations: a systematic review. J Oral Rehabil. 2011;38(9):697-711. doi: 10.1111/j.1365-2842.2011.02209.x.
Ates SM, Korkmaz FM, Caglar IS, Duymus ZY, Turgut S, Bagis EA. The effect of ultrafast fiber laser application on the bond strength of resin cement to titanium. Lasers Med Sci. 2017;32(5):1121-9. doi: 10.1007/s10103-017-2216-8
Ustun O, Akar T, Kirmali O. A comparative study of laser irradiation versus sandblasting in improving the bond strength of titanium abutments. Photobiomodul Photomed Laser Surg. 2019;37(8):465-72. doi: 10.1089/photob.2018.4601.
Sahu N, Lakshmi N, Azhagarasan NS, Agnihotri Y, Rajan M, Hariharan R. Comparison of the effect of implant abutment surface modifications on retention of implant-supported restoration with a polymer based cement. J Clin Diagn Res. 2014;8(1):239-42. doi: 10.7860/jcdr/2014/7877.3931.
de Campos TN, Adachi LK, Miashiro K, Yoshida H, Shinkai RS, Neto PT, et al. Effect of surface topography of implant abutments on retention of cemented single-tooth crowns. Int J Periodontics Restorative Dent. 2010;30(4):409-13. doi: 10.11607/prd.00.0927.
Kim JT, Cho SA. The effects of laser etching on shear bond strength at the titanium ceramic interface. J Prosthet Dent. 2009;101(2):101-6. doi: 10.1016/s0022-3913(09)60002-0.
Cao Y, Guo YY, Chen L, Han J, Tong H, Zhang B, et al. Effects of different surface treatments on bond strength of resin cement to machined pure titanium. J Adhes Dent. 2019;21(5):401-11. doi: 10.3290/j.jad.a43182.
Akin H, Tugut F, Topcuoglu S, Kirmali O. Effects of sandblasting and laser irradiation on shear bond strength of low-fusing porcelain to titanium. J Adhes Dent. 2013;15(1):55-63. doi: 10.3290/j.jad.a28673.
Korkmaz FM, Aycan S. Effect of fiber laser irradiation on the shear bond strength between acrylic resin and titanium. Scanning. 2019;2019:5452919. doi: 10.1155/2019/5452919.
Tuncdemir AR, Buyukerkmen EB, Celebi H, Terlemez A, Sener Y. Effects of postsurface treatments including femtosecond laser and aluminum-oxide airborne-particle abrasion on the bond strength of the fiber posts. Niger J Clin Pract. 2018;21(3):350-5. doi: 10.4103/njcp.njcp_425_16.
García-Sanz V, Paredes-Gallardo V, Bellot-Arcís C, MendozaYero O, Doñate-Buendía C, Montero J, et al. Effects of femtosecond laser and other surface treatments on the bond strength of metallic and ceramic orthodontic brackets to zirconia. PLoS One. 2017;12(10):e0186796. doi: 10.1371/ journal.pone.0186796.
Murthy V, Manoharan, Balaji, Livingstone D. Effect of four surface treatment methods on the shear bond strength of resin cement to zirconia ceramics- a comparative in vitro study. J Clin Diagn Res. 2014;8(9):ZC65-8. doi: 10.7860/ jcdr/2014/10104.4872.
Al Ahdal K, Al Deeb L, Bin-Shuwaish MS, Al-Hamdan RS, Al Deeb M, Maawadh AM, et al. Bond integrity of titanium surface to resin cement after conditioning with different photobiomodulataion therapy (PBT). J Biomater Tissue Eng. 2021;11(5):970-5. doi: 10.1166/jbt.2021.2661.
Erdoǧan M, Öktem B, Kalaycıoǧlu H, Yavaş S, Mukhopadhyay PK, Eken K, et al. Texturing of titanium (Ti6Al4V) medical implant surfaces with MHz-repetition-rate femtosecond and picosecond Yb-doped fiber lasers. Opt Express. 2011;19(11):10986-96. doi: 10.1364/oe.19.010986.
Kurt M, Külünk T, Ural C, Külünk Ş, Danişman Ş, Savaş S. The effect of different surface treatments on cementretained implant-supported restorations. J Oral Implantol. 2013;39(1):44-51. doi: 10.1563/aaid-joi-d-10-00151.
Miranda PV, Rodrigues JA, Blay A, Shibli JA, Cassoni A. Surface alterations of zirconia and titanium substrates after Er,Cr:YSGG irradiation. Lasers Med Sci. 2015;30(1):43-8. doi: 10.1007/s10103-013-1516-x.
Agrawal R, Wang C. Laser beam machining. In: Bhushan B, ed. Encyclopedia of Nanotechnology. Netherlands: Springer; 2016. p. 1739-53.
Hao L, Lawrence J. Laser Surface Treatment of Bio-Implant Materials. Sussex, UK: Wiley; 2006.
Elsaka SE, Swain MV. Effect of surface treatments on the adhesion of self-adhesive resin cements to titanium. J Adhes Dent. 2013;15(1):65-71. doi: 10.3290/j.jad.a27827.
Kılıçarslan MA, Özkan P, Mumcu E, Deniz ŞT. Efficacy of uncommon surface treatment methods on titanium in order to improve bond strengths for adhesive cementation. J Adhes Sci Technol. 2016;30(21):2345-56. doi: 10.1080/01694243.2016.1182825.
Venkat G, Krishnan M, Srinivasan S, Balasubramanian M. Evaluation of bond strength between grooved titanium alloy implant abutments and provisional veneering materials after surface treatment of the abutments: an in vitro study. Contemp Clin Dent. 2017;8(3):395-9. doi: 10.4103/ccd.ccd_118_17.
Ayobian-Markazi N, Karimi M, Safar-Hajhosseini A. Effects of Er:YAG laser irradiation on wettability, surface roughness, and biocompatibility of SLA titanium surfaces: an in vitro study. Lasers Med Sci. 2015;30(2):561-6. doi: 10.1007/ s10103-013-1361-y.
Toledano M, Osorio R, Osorio E, Aguilera FS, Yamauti M, Pashley DH, et al. Durability of resin-dentin bonds: effects of direct/indirect exposure and storage media. Dent Mater. 2007;23(7):885-92. doi: 10.1016/j.dental.2006.06.030.
- Abstract Viewed: 160 times
- PDF Downloaded: 176 times