Evaluation of Different Types of Lasers in Surface Conditioning of Porcelains: A Review Article
Journal of Lasers in Medical Sciences,
Vol. 8 No. 3 (2017),
30 June 2017
,
Page 101-111
Abstract
To achieve proper bond strength for porcelains, adequate surface roughness is essential, which is traditionally gained by sandblasting or acid etching with hydrofluoric (HF) acid. Nowadays with the development of laser systems, serious efforts were made to apply this new instrument for surface etching of porcelains due to easy usage, safety, and more efficiency. There are different kinds of lasers and porcelains, so choosing the ones which will be good match for each other is crucial. Besides that, changing the irradiation setting can be beneficial as well. This article reviewed 33 related studies and summarized results of etching accomplished by Nd:YAG, Er:YAG, Er,Cr:YSGG and CO2 lasers on different types of porcelains considering different laser settings and evaluation methods to bring a comprehensive insight.- Porcelain
- Nd
- YAG
- Er
- Cr
- YSGG
- CO2
- Conditioning
- Orthodontics
How to Cite
References
Zelos L, Bevis RR, Keenan KM. Evaluation of the ceramic/ceramic interface. Am J Orthod Dentofacial Orthop. 1994; 106:10–21.
Kelly JR, Benetti P. Ceramic materials in dentistry: historical evolution and current practice. Aust Dent J. 2011;56 Suppl 1:84-96.
Shenoy A, Shenoy N. Dental ceramics: An update. J Conserv Dent. 2010;13(4):195-203.
Guptaa S, Kumarb S. Lasers in Dentistry-An Overview. Trends Biomater Artif Organs. 2011;25(3):119–23.
Zachrisson YO, Zachrisson BU, Buyukyilmaz T. Surfacepreparation for orthodontic bonding to porcelain. Am J Orthod Dentofacial Orthop. 1996; 109:420–30
Hayakawa T, Horie K, Aida M, Kanaya H, Kobayashi T, Murata Y. The influence of surface conditions and silane agents on the bond of resin to dental porcelain. Dent Mater. 1992; 8:238–40
Gillis I, Redlich M. The effect of different porcelain conditioningtechniques on shear bond strength of stainless steel brackets.Am J Orthod Dentofacial Orthop. 1998; 114:387–92.
Sulewski JG. Historical survey of laser dentistry. Dental Clinics of North America. 2000;44(4):717-52.
Wigdor HA, Walsh JT, Featherstone JD, Visuri SR, Fried D, Waldvogel JL. Lasers in dentistry. Lasers Surg Med. 1995;16(2):103-33.
Sun G, Tunér J. Low-level laser therapy in dentistry. DentClin North Am. 2004 ;48(4):1061-76,
Zarif Najafi H, Oshagh M, Torkan S, Yousefipour B, Salehi R. Evaluation of the effect of four surface conditioning methods on the shear bond strength of metal bracket to porcelain surface. Photomed Laser Surg. 2014;32(12):694-9.
Sgura R, Reis MC, Hernandes AC, de Abreu Fantini MC, Andreeta MRB, Medeiros IS. Surface treatment of dental porcelain: CO2 laser as an alternative to oven glaze. Lasers Med Scie. 2015;30(2):661-7.
Fornaini C, Rocca J, Bertrand M, Merigo E, Nammour S, Vescovi P. Nd: YAG and diode laser in the surgical management of soft tissues related to orthodontic treatment. Photomed Laser Surg. 2007;25(5):381-92.
Sadat Madani A, Astaneh PA, Shahabi S, Nakhaei MR, Bagheri HG, Chiniforush N. Influence of different power outputs of intraoral Nd:YAG laser on shear bond strength of a resin cement to nickel-chromium dental alloy. Lasers Med Sci. 2013;28(1):229-34.
Diaci J, Gaspirc B. Comparison of Er: YAG and Er, Cr: YSGG lasers used in dentistry. Review JLAHA. 2012;1:1-13.
Stock K, Hibst R, Keller U, editors. Comparison of Er: YAG and Er: YSGG laser ablation of dental hard tissues. Proc. SPIE. 1997;3192. doi:10.1117/12.297864
Lee BS, Hsieh TT, Lee YL, Lan WH, Hsu YJ, Wen PH, et al. Bond strengths of orthodontic bracket after acid-etched, Er: YAG laser-irradiated and combined treatment on enamel surface. Angle Orthod. 2003;73(5):565-70.
Urabe H, Rossouw PE, Titley KC, Yamin C. Combinations of etchants, composite resins, and bracket systems: an important choice in orthodontic bonding procedures. Angle Orthod. 1999;69(3):267-75.
Liu L, Liu S, Song X, Zhu Q, Zhang W. Effect of Nd: YAG laser irradiation on surface properties and bond strength of zirconia ceramics. Lasers Med Sci. 2013;30(2):627-34.
Akpinar YZ, Irgin C, Yavuz T, Aslan MA, Kilic HS, Usumez A. Effect of Femtosecond Laser Treatment on the Shear Bond Strength of a Metal Bracket to Prepared Porcelain Surface. Photomed Laser Surg. 2015;33(4):206-12.
Sadeghi M, Davari A, Mahani AA, Hakimi H. Influence of Different Power Outputs of Er: YAG Laser on Shear Bond Strength of a Resin Composite to Feldspathic Porcelain. J Dent. 2015;16(1):30.
Kara O, Kara HB, Tobi ES, Ozturk AN, Kilic HS. Effect of Various Lasers on the Bond Strength of Two Zirconia Ceramics. Photomed Laser Surg. 2015;33(2):69-76.
Erdur EA, Basciftci FA. Effect of Ti:sapphire laser on shear bond strength of orthodontic brackets to ceramic surfaces. Lasers Surg Med. 2015;47(6):512-9.
Aksakalli S, Ileri Z, Yavuz T, Malkoc MA, Ozturk N. Porcelain laminate veneer conditioning for orthodontic bonding: SEM-EDX analysis. Lasers Med Sci. 2014:1-6.
Rocca J-P, Fornaini C, Brulat-Bouchard N, Seif SB, Darque-Ceretti E. CO 2 and Nd: YAP laser interaction with lithium disilicate and Zirconia dental ceramics: A preliminary study. Optics Laser Technol. 2014;57:216-23.
Murthy V, Manoharan B, Livingstone D. Effect of four surface treatment methods on the shear bond strength of resin cement to zirconia ceramics-a comparative in vitro study. Journal of clinical and diagnostic research: JCDR. 2014;8(9):ZC65.
Zarif Najafi H, Oshagh M, Torkan S, Yousefipour B, Salehi R. Evaluation of the Effect of Four Surface Conditioning Methods on the Shear Bond Strength of Metal Bracket to Porcelain Surface. Photomed Laser Surg. 2014;32(12):694-9.
Akhavan Zanjani V, Ahmadi H, Nateghifard A, Ghasemi A, Torabzadeh H, Abdoh Tabrizi M, et al. Effect of different laser surface treatment on microshear bond strength between zirconia ceramic and resin cement. J Investig Clin Dent. 2014.
Tai Y, Zhu X, Sen Y, Liu C, Zhang X, Shi X. [Influence of different surface treatments on porcelain surface topography]. Hua xi kou qiang yi xue za zhi= Huaxi kouqiang yixue zazhi= West China J Stomatol. 2013;31(1):57-60.
Hosseini MH, Sobouti F, Etemadi A, Chiniforush N, Bouraima SA. Scanning Electron Microscope Comparative Evaluation of Feldspathic Porcelain Surfaces under Irradiation by Different Powers of Neodymium-Doped Yttrium Aluminium Garnet (Nd: YAG) Laser. J Lasers Med Sci. 2013;4(2):75.
Hosseini MH, Sobouti F, Etemadi A, Chiniforush N. Shear bond strength of metal brackets to feldspathic porcelain treated by Nd: YAG laser and hydrofluoric acid. Lasers Med Sci. 2013;30(2):837-41.
Usumez A, Hamdemirci N, Koroglu BY, Simsek I, Parlar O, Sari T. Bond strength of resin cement to zirconia ceramic with different surface treatments. Lasers Med Sci. 2013;28(1):259-66.
Yassaei S, Moradi F, Aghili H, Kamran M. Shear bond strength of orthodontic brackets bonded to porcelain following etching with Er: YAG laser versus hydrofluoric acid. Orthodontics. 2012;14(1):e82-7.
Kursoglu P, Motro PFK, Yurdaguven H. Shear bond strength of resin cement to an acid etched and a laser irradiated ceramic surface. J Adv Prosthodont. 2013;5(2):98-103.
Kara HB, Dilber E, Koc O, Ozturk AN, Bulbul M. Effect of different surface treatments on roughness of IPS Empress 2 ceramic. Lasers Med Sci. 2012;27(2):267-72.
Subaşı MG, İnan Ö. Evaluation of the topographical surface changes and roughness of zirconia after different surface treatments. Lasers Med Sci. 2012;27(4):735-42.
Poosti M, Jahanbin A, Mahdavi P, Mehrnoush S. Porcelain conditioning with Nd: YAG and Er: YAG laser for bracket bonding in orthodontics. Lasers Med Sci. 2012;27(2):321-4.
Dilber E, Yavuz T, Kara HB, Ozturk AN. Comparison of the effects of surface treatments on roughness of two ceramic systems. Photomed Laser Surg. 2012;30(6):308-14.
Ahrari F, Heravi F, Hosseini M. CO2 laser conditioning of porcelain surfaces for bonding metal orthodontic brackets. Lasers Med Sci. 2013;28(4):1091-7.
Akyıl MŞ, Yilmaz A, Karaalioğlu OF, Duymuş ZY. Shear bond strength of repair composite resin to an acid-etched and a laser-irradiated feldspathic ceramic surface. Photomed Laser Surg. 2010;28(4):539-45.
da Silva Ferreira S, Hanashiro FS, de Souza-Zaroni WC, Turbino ML, Youssef MN. Influence of aluminum oxide sandblasting associated with Nd: YAG or Er: YAG lasers on shear bond strength of a feldspathic ceramic to resin cements. Photomed Laser Surg. 2010;28(4):471-5.
Akyıl MŞ, Uzun İH, Bayındır F. Bond strength of resin cement to yttrium-stabilized tetragonal zirconia ceramic treated with air abrasion, silica coating, and laser irradiation. Photomed Laser Surg. 2010;28(6):801-8
Osorio E, Toledano M, da Silveira BL, Osorio R. Effect of different surface treatments on In-Ceram Alumina roughness. An AFM study. J Dent. 2010;38(2):118-22.
Cavalcanti AN, Pilecki P, Foxton RM, Watson TF, Oliveira MT, Gianinni M, et al. Evaluation of the surface roughness and morphologic features of Y-TZP ceramics after different surface treatments. Photomed Laser Surg. 2009;27(3):473-9.
Ersu B, Yuzugullu B, Yazici AR, Canay S. Surface roughness and bond strengths of glass-infiltrated alumina-ceramics prepared using various surface treatments. J Dent. 2009;37(11):848-56.
Spohr AM, Borges GA, Júnior LHB, Mota EG, Oshima HMS. Surface modification of In-Ceram Zirconia ceramic by Nd: YAG laser, Rocatec system, or aluminum oxide sandblasting and its bond strength to a resin cement. Photomed Laser Surg. 2008;26(3):203-8.
An K-M, Sohn D-S. The effect of using laser for ceramic bracket bonding of porcelain surfaces. Korean J Orthod. 2008;38(4):275-82.
Shiu P, De Souza-Zaroni WC, Eduardo CdP, Youssef MN. Effect of feldspathic ceramic surface treatments on bond strength to resin cement. Photomed Laser Surg. 2007;25(4):291-6.
Gökçe B, Özpinar B, Dündar M, Cömlekoglu E, Sen B, Güngör M. Bond strengths of all-ceramics: acid vs laser etching. Oper Dent. 2007;32(2):173-08.
Akova T, Yoldas O, Toroglu MS, Uysal H. Porcelain surface treatment by laser for bracket-porcelain bonding. Am J Orthod Dentofacial Orthop. 2005;128(5):630-7.
Tengrungsuna T, Prombutrab S, Kaewsuriyathamrongc C, Suchatod W, Jaochakarasirie P. Shear Bond Strength of Orthodontic Brackets Bonded to Different Preparations of a Porcelain Surface. J Oral Laser Appl. 2004;4(1): 47-53.
- Abstract Viewed: 1217 times
- PDF Downloaded: 581 times